ICSH7D, HT7D, ICS7D/22D & ICS7E/22E - Firmware Update (NOT FOR THE W or CPT RANGE)

Modified on Fri, 20 Mar at 9:34 AM

Step 1 – Download the Update File


At the bottom of the article, download the ZIP file provided.

Do not unzip, rename, or modify the file. Leave it exactly as downloaded.

 

Step 2 – Connect to the Charger’s Wi‑Fi Hotspot


Each charger broadcasts a Wi‑Fi hotspot named: ICS-2.4GHz-XXXXXX

  • Connect to this signal.
  • Enter the password: ics654321
  • Stay next to the charger to ensure the connection remains stable.

 


Step 3 – Log In to the Charger Interface


1. Open your device’s default browser

            iPhone → Safari

            Android → Chrome


2. In the address bar, enter 192.168.10.1


3. When prompted, log in using:

            Username: icsadmin

            Password: 999icspass (default unless changed previously)


If prompted to create a new password, create one with No Special Characters and make a note of it. 


5. Log in again with:

            Username: install

            Password: Your new password


If no password‑change prompt appears, this means a password change has already been actioned. You can reset it by temporarily connecting an Ethernet cable from your router to the charger and contacting the technical department once fitted.

 

Step 4 – Start the Firmware Upgrade


Once logged in, navigate to the System section.


Click on the Upgrade icon.


Press the '+ Firmware' button and upload the file attached. Once attached, press 'Upgrade from Local' the charge point will then update and reboot - Please give 5 minutes for the charger to update.



Log back in and configure:

Once the charger has successfully updated, it will reboot for a few minutes. Once rebooted, re-connect to the chargers Wi-Fi signal and log into the configuration page 192.168.10.1 with the following details:


Username: install

Password: icspass21


It will then ask you to change the password, re-enter the existing password (icspass21) in the old password box and then create the new password. DO NOT USE SPECIAL CHARACTERS.


Please note that once this is changed, iCS have no way of resetting this password so please ensure it's memorable.


Once the password has been changed, log back in and follow the setup wizard to pair your charger to the internet. - The H7D manual can be found here.





Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article