ICSESSG - Instructions

Modified on Fri, 22 Dec, 2023 at 8:12 AM

Ensure the gateway is powered on:
Check that the light on the front of the gateway device is illuminated.

Connect to the charge points hotspot:
Connect your device (Phone, Tablet or Laptop) to the chargers Wi-Fi (AP_ICS-*******) connect to this network using the default password which is ics654321 this information can be found on the sticker on the side of the unit 


 


Access the web configuration page:
Open a web browser (Safari, Chrome etc) and enter the IP address 192.168.10.1 and enter the username and password:  
 
Username: install
Password: icspass21
  
It will then ask you to change the password, re-enter the existing password (icspass21) in the old password box and then create the new password which can be whatever you want it to be. Please note that once this is changed, iCS have no way of resetting this password so please ensure it's memorable.


Disable offline mode:


Once you have logged back in, you will be presented with the setup wizard.


First, disable the offline mode, which will bring up server information.




Change the 'Preset Server' 

The next step is to change the preset server to 'iCS2.0 Lite', simply click into the drop down and then select iCS2.0 Lite.


Once complete, press the next step button.


You will notice that the port changes from 9103 to 9113 which confirms the correct settings have been changed.



Select your connection method:

It's now time to choose how you are connecting the gateway to the internet, either WiFi or LAN. If LAN just click next step.


If you are connecting to WiFi, select WiFi from the drop down as shown below.



Press the scan button, or the circular arrow button, then select the household Wi-Fi network. 


Input the Wi-Fi password for the network and then click next step.



Option to change AP password:

The next step gives you the option to change the AP password for the gateway, we recommend keeping this as the default.



Regulation Tab:

This is not used, click Next Step.



Setup Wizard Complete:


Press the confirm button and wait for the gateway to reboot.




If after 5 minutes your gateway doesn't come online, then follow the below instructions:


Log back into the configuration page (192.168.10.1) once logged in, you will notice the screen it now different.


Click the 'Balance' button,


Click the 'Advanced Settings' Button,


Scroll down to Energy Management Server, 


Select the Preset Server option and select 'ICS2.0 Lite'


Press the submit button,


Go back and then press the reboot button.



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article